DVT DM Reader Software Version 1.0 README file
Property of DVT Corp. 
All Rights Reserved.

Welcome to the new DM Reader Software from DVT Corporation. This friendly user interface will assist you in setting up and maintaining a DataMatrix reading inspection without the need of Framework or Intellect, our multipurpose Software packages.


INSTALLATION
============
Requirements:
A PC running Windows 2000 or Windows XP and Internet Explorer 5.01 or later.
This program will require approximately 25 MB of hard disk space. If the .NET framework is not already installed on this computer, it will be installed so extra space will be required.

Instructions:
Unzip the contents of the file to a known directory and double click on the "Setup.exe" file. As tempting as it may be please DO NOT click on the "DVTDM Install" file, this file contains just one of the steps for installation. 
If your PC does not have the Microsoft .net Framework installed you will be prompted to install it, if you say NO the installation of this software cannot take place. The installation of the Microsoft .net Framework v 1.1 is included in this package so there will be no need to download anything from the internet.


QUICK SYSTEM SETUP
==================

This software makes setting up your new system as easy as clicking a button. Once you take your new system out of the box and connect it to the network, open the DM Reader, identify the system in the systems list, select it and click on the "Edit System Parameters" button, just below the system list. This will bring up a new dialog in which you can choose to change the network settings (before using a random IP Address you should ask your network administrator) and indicate that you are going to configure the system for first time use, click OK and wait for the Software to do the rest.
At the end of the process the software should connect to the configured system. Once this takes place manually focus the lens and when you have a good image of the part inside the blue region of interest click the "Learn" button. 

NOTES:
* Hardware platforms supported by this software are: Legend 540, Legend 550, Legend IS, and Legend XS.

For more detailed information you can access the Help file for the DM Reader application. You can click on the Help button and then click on any feature of the interface to get specific information. You can also use the F1 key and you will obtain specific help about the control that has focus.

This Readme file is included on the directory where the DM Reader application was installed.
